High quality hydraulic motors, output shaft bearings which are 50% larger than our nearest competitors comparable drive and the use of only high-grade materials. The latest manufacturing techniques is what makes this range of earth drills the market leaders. The extensive range of Auger Torque Earth Drills (also known as Auger Drives) gives you complete versatility, peace of mind and efficiency. Developed to work with all makes and models of parent machine, and complemented with a range of attachments, you will find an earth drill and attachment for your every need. With the versatility to easily switch between attachments depending on the job at hand, you can be sure that your Auger Torque Earth Drill will deliver, time and again.
Auger Torque’s Earth Drills are built to the most exacting standards using only high quality materials and the latest manufacturing techniques available.
Standard with all Earth Drills in areas that we know will take a lot of strain. All hood pins are locked for extra safety making it impossible for the hood to detach from your hitch.
Torque is amplified by using the unique Auger Torque planetary gearbox. This system allows the motors output torque to be multiplied with extreme efficiency as well as ensuring the durability and reliability you need.
Unique to Auger Torque, the Non-Dislodgement Shaft is a single piece drive shaft assembled top down and locked into the Earth Drill housing. This design guarantees that the shaft will never fall out, making for a safer work environment, not only for the operator but also any surrounding workers, a MUST-HAVE FEATURE for any safety conscious company.
Auger Torque’s huge buying power means we work closely with high quality suppliers to develop the most reliable attachments available on the market today.
All Earth Drills come standard with high quality hoses and adaptors (excludes larger units. QRC’s not included).
Suitable for excavators, skid steer loaders, telehandlers, backhoes and truck cranes, the Auger Torque augers can drill widths of 100mm on smaller machines and up to 2.4m on larger machines and can drill to depths of 12m (with extensions and using the correct earth drill). Our inhouse manufacturing capabilities means we can design and fabricate to your specification, to suit your machine and job. So, whether its post holes, holes for fencing, signposts, post frame buildings, foundation footings, light and utility poles, our augers will make light work of it and ensure that every job you tackle a resounding success.
Augers are available with all major standard hubs on the market including: 2” 2.5”, 3” and 4” Hex, 50mm, 2” and 65mm round plus 57mm, 75mm, 100mm, 110mm and 130mm square to name a but a few!
We know that our augers can expect a tough life, so we only use the highest-grade steel and vary our tube size according to machine size and application. Our augers have a reputation of being the toughest on the market.
By working with and more importantly listening to operators in the field, we have developed the perfect pitch for our flights, ensuring the spoil will stay on your auger when you remove it from the hole, giving you maximum efficiency on the job.
Our boring heads are designed with a constant spiral cut. Teeth are located so that each makes its own fresh cut on every revolution and are angled to direct spoil towards the centre of the auger. The tooth cutting angle ensures spoil is broken up thoroughly to avoid any clogging.
Our augers are offered with many different tooth and pilot options to you suit your specific need. For example, in the S4 range we offer up to eight different combinations and we have the know-how to help you select the optimal configuration.
The patented Auger Torque shock Lock™ tooth locking system makes losing teeth a thing of the past. The shock lock pin and rubber in our unique shock lock tooth holders ensures your auger teeth are safely locked in place and protected against shock fractures. Replacing worn teeth is simple, just knock out the old pin with a standard hole punch and the tooth will slide out of the holder with ease. You will never need to worry about fitting spare teeth due to losing them again.
After many requests from customers for an auger & screw pile drive in the 100,000-150,000 Nm range over the years we are pleased to meet this demand by adding this new heavy duty earth drill range we are proud to paint in our famous blue colour. Large main shaft bearings, a 1 piece drive shaft with NDS technology, an axial piston motor and finally the oversize 150mm HEX drive shaft will make this your drive of choice. When the going gets tough, whether you are drilling wide or deep or you are trying to get through some rock with a core barrel this range of drives you should be top of your list.
The driveshaft is crucial for reliability and it goes without saying that the bigger the better applies here. A shaft is always stronger when machined as a hex and the 150mm diameter is the largest in the industry, especially when looking at compatibility on machine as small as 21T.
Axial Piston Motors allow us to run a single speed motor. By using an axial piston motor with our drive we can have a high speed motor but still achieve high torques through the gearbox multiplication. At maximum flow we achieve 15 rpm.
As standard with all of our auger & screw pile drives, our patented single-piece non-dislodgement shaft is of course a standard feature. We are so confident in this must have safety feature that we are covering it with a lifetime warranty.
Torque is amplified by using the unique Auger Torque planetary gearbox. This system allows the motors output torque to be multiplied with extreme efficiency as well as ensuring the durability and reliability you need.
Performance is increased due to the precise positioning of the tooth, and the penetrative forces which can be found on the tooth cutting edge give improved productivity when cutting through hard ground and fractured rock. The increase in force, fractures the substrates into large pieces bringing them to the surface at an increased rate compared to traditional cutting heads. The hard rock auger comes with multiple hub options, and is made from the highest grade steel to ensure it will stand the toughest of applications and terrain.
Hard rock augers are available in 2 popular sizes, 75mm and 110mm square.
The hard rock auger range will be used for the toughest of applications, and therefore we only use the highest-grade steel and vary our size according to machine size and application.
By working with and listening to operators feedback, we have developed the perfect pitch for our flights. It will cut at its maximum efficiency and most importantly the spoil will stay on the cutting head whilst you remove it from the hole.
Our cutting heads are designed with a constant spiral cut. Teeth are located so that each tooth makes its own fresh cut on every revolution and are angled to direct spoil towards the centre of the cutting head. The tooth cutting angle ensures spoil is broken up thoroughly to avoid any clogging.
The hard rock augers are offered with our rotating rock tooth and pilot to suit your hard rock needs.
The SB range of Hammers have been designed to give you the ultimate in versatility, reliability and efficiency. Suitable for 0.5-12 Ton excavators, skid steers and backhoes, and with a range of tool options, these hammers make easy work of planting fence posts through to demolishing concrete and rock, breaking asphalt and pathways, and light quarry tasks. The SB Hammers are made of high-grade steel and consist of a simple but ingenious design with only two moving parts. The cartridge design without tie rods makes it extremely quiet, allowing operators to work longer hours and complete contracts in shorter time frames.
The laborious task of digging a trench has been transformed since the advent of the Trencher Attachment. Auger Torque’s range of trenchers are available for a wide range of skidsteers, mini loaders, backhoes and excavators up to 10 tonnes in weight and cover depths of up to 1.5 meters and widths up to 350mm, whilst spoil is piled neatly to the side of the trench by the integral auger. Using only the highest quality hydraulic motors that allow flow rates of up to 150LPM and Auger Torque’s planetary gearbox, means these trenchers have the reliability and power you need to ensure your trenching is carried out with ease.
Using only the highest quality hydraulic motors that allow flow rates of up to 150LPM and then amplified by Auger Torque’s own ‘bullet-proof’ planetary gearbox means that our trenchers have the reliability you need and the power to ensure your trenching is carried out with ease.
Torque is amplified by using the unique Auger Torque planetary gearbox. This system allows the motors output torque to be multiplied with extreme efficiency as well as ensuring the durability and reliability you need.
All Trenchers are supplied as standard with high quality hoses and adaptors.
Chains are available in a number of different teeth configurations for trenching in soft ground, mixed grounds and even permafrost, allowing you to get the job done quickly.
A great feature that will make your job much easier is the precision depth control skid, which enables the operator to set the machine at up to three different trench depths.
The length of the chain can be quickly adjusted with the removal of a screw to move the boom.
Suitable for excavators and skid steer loaders, the Variable Mulcher provides a working width of up to 1.5m. Both the VM1000 & VM1500 have the unique feature of being able to change the drum on-site, adapting quickly between parent machines for maximum versatility & flexibility on the job, without having to return to the yard. The ability to attach a skid steer frame and excavator hitch at the same time, along with a removable pressure gauge & push bar allows for easy adaptation between parent machines when out on site. The fixed tungsten teeth drum gives a robust blunt cutting edge for grinding through thick timber, hedges and branches. The swinging hammer teeth drum gives a cleaner, more precise cut for dense bushes, smaller trees & even slashing grass.
The Auger Torque hedge trimmer is the perfect addition for excavators (3300 – 5512 lbs) and offers a variety of motor sizes to suit your application. Attaching the hedge trimmer to an excavator provides extra-long cutting reach, gaining access to those taller trees, deeper hedges and hard to reach shrubbery. The hedge trimmer is also ideal for cutting long grass and brush. Attaching the optional tooth extension bar provides a full 60 inch cutting length, helping you make trimming more precise, efficient and will provide yet another way to expand the versatility of your existing machines.
Suitable for excavators from 1T – 5T and skid steer loaders, Auger Torque’s compact and robust log splitter makes light work of processing those fallen trees into manageable pieces, quickly and efficiently. As the log Splitter rotates, the self-guiding threaded body engages with the timber and draws the splitter into the log. The conical shape quickly works its way through the log, splitting the log in two. For larger logs, the Splitter can be repositioned to continue the split along the whole length of the log. The Auger Torque log splitter is a quick and easy additional attachment to your existing earth drill.
Removal of tree stumps is a job which, at best, is noisy, messy and time consuming. Traditional methods of removal, shower chippings over a wide area, making clean up a time-consuming exercise. The Auger Torque Stump Planer is the quick and easy additional attachment to any earth drill for the effective, easy and clean removal of tree stumps of any size and a must-have product for those working in ground preparation and woodland maintenance.
Hardwearing, replaceable blades rotate, shaving the wood into a tidy pile.
A range of different hub options.
A balanced, even cut is achieved thanks to the built-in stability bars.
The unique, replaceable pilot engages with the tree Stump, drawing the blades down to the surface of the stump.
Tackle very large tree stumps with ease by making multiple cuts in a spiral pattern, starting from the outside and working towards the centre.
Fencing tasks over rough ground often require post fixing cement to be mixed in small quantities, however, rough terrain can often mean a traditional mixer can’t be used. Auger Torque’s drill/mix solution changes all that. With the aid of the mixer cradle hitch, the auger can be quickly removed and the mixer bowl attached and locked in place with the standard auger pin. After the concrete has been laid the auger can be replaced for the next post. Simple! Available in a 180-litre capacity, the Auger Torque Mixer Bowl attaches quickly and easily to our earth drills. Skid steer and excavator mount brackets are available, and a mixer bowl is the perfect addition to our Mini Loader Earth Drill range.
Material handling around a construction site demands a great deal of flexibility. Heavy duty construction, the precision mounting plate and various other ingenious features make our Pallet Fork attachment for the skid steer loader a ‘must have’ item. The ideal solution for locations where pallet handling is needed but the site is unmade or too rough for a forklift truck. A variety of sizes, easily adjustable, and easy storage are some of the key features.
Auger Torque brooms are precision engineered from high grade steel. Easy adjustment, simple brush replacement, high quality hydraulic motors and low maintenance design are just a few of the features. With the optional high capacity, low profile dust suppression system for keeping airborne dust to a minimum, our brooms really do stand out from the rest. Availability for Skid Steer Loaders, Front End Loaders and Telehandlers means we will be able to help you out with the right broom for your application.
The Auger Torque Alignment Monitor is an essential tool for ensuring you accurately drill holes every time. No more misaligned, uneven holes, and single man operation ensures optimum efficiency and cost effectiveness. Unrestricted by parent machine size, the Alignment Monitor is easy to install on your existing equipment, with a compact and bright LED display. The operator can see the alignment from all angles, meaning there is no need for additional operatives to watch over the installation. A one-man operation with accurate, fast and cost-effective results. Perfect for auger and screw anchor applications.
Tilt Hitch with 25 + 25 degrees tilt angle. Can be adapted to fit your excavator during manufacture to avoid shims. Semi-automatic or hydraulic locking. Low maintenance requirements. Few lubrication points and few moveable parts. Extension shaft in the outer waistband.
Contact us to get the right dimension for your excavator.
Several types of brackets are available for different needs.
Check the tables for how the buckets are designed along with material used and steel thickness.
